Water Softener Repair in Macon, GA

Trusted Water Softener Repair Services in Macon, GA

Softener Not Regenerating in Macon

If hard water symptoms return, the softener may not be regenerating. Causes include a failed timer motor, a bad circuit board, a stuck meter turbine or incorrect settings after a power outage. We test each component, replace the failed part and program the valve for your household size and hardness. You get soft water again after the next cycle.

Salt Bridge and Brine Tank Repair in Macon, GA

A salt bridge is a hard crust that forms in the brine tank and keeps salt from dissolving. The tank looks full, but the softener cannot make brine. We break up bridges, clean out mushy salt, inspect the float and brine well and repair the safety valve. We also recommend salt types that bridge less in warm or humid spaces.

Water Softener Leak Detection & Repair in Macon, GA

Leaks around your water softener can be caused by cracked tanks, loose fittings, faulty O-rings, or pressure issues. Even a small leak can lead to water damage and wasted water. Our team uses dedicated tools to quickly locate the source of any leak, whether it's a slow drip or a significant pool. We then perform careful repairs, from tightening connections and replacing seals to patching cracks or replacing damaged components, protecting your home from water intrusion.

Brine Tank and Salt Bridge Repair in Macon, GA

A salt bridge, a crust of salt that forms in the brine tank, can prevent your water softener from regenerating properly. This leads to hard water throughout your home. Our team can effectively break up and remove salt bridges, clean the brine tank, and advise on best practices to prevent future occurrences. We also repair leaks or damage to the brine tank itself, common in older systems.

Injector and Brine Line Cleaning in Macon, GA

The injector, sometimes called a venturi, creates suction to draw brine into the resin tank. Sediment and salt residue clog its tiny ports. When it clogs, the brine tank fills with water instead of emptying. We clean or replace the injector and screen and check the brine line for leaks.

Resin Bed Replacement in Macon

Over time, the resin beads in your water softener can become fouled or degrade, losing their ability to exchange ions and soften water. This is a frequent issue, especially with older systems or those exposed to high levels of chlorine. HGR Plumbing provides professional resin bed replacement services, properly removing old resin and installing new, high-quality media to restore your softener's efficiency and capacity in Macon.

Hard Water Symptoms & Diagnostics in Macon

If you're noticing scale buildup on faucets, cloudy dishes, dry skin and hair, or clothes that feel stiff after washing, your water softener probably needs attention. HGR Plumbing offers comprehensive diagnostic services to identify the root cause of these hard water symptoms. We check water hardness levels, inspect all system components, and provide an accurate assessment and repair plan suited to your home in Macon.

Salt Bridge & Brine Tank Repair in Macon

A frequent issue with salt-based water softeners is a salt bridge forming in the brine tank, preventing the salt from dissolving properly. This leads to inefficient regeneration and hard water. Our technicians are skilled at breaking up these bridges, cleaning the brine tank, and ensuring the float switch and brine well are functioning correctly. We also inspect for any leaks or cracks in the tank itself that could be compromising your system's performance, offering precise repairs or replacements.